PERENCANAAN STRUKTUR GEDUNG KANTOR OTORITAS JASA KEUANGAN (OJK) KAWASAN REGIONAL 4 DENGAN METODE BETON PRACETAK
Abstract
This study aims to plan the structure of the Regional Financial Services Authority Office Building 4 East Java using precast concrete. The use of precast concrete is based on advantages in terms of economy, efficiency, speed of implementation, and energy consumption that have an impact on the environment. The precast concrete structure is designed by assuming the structure is monolithic cast in place. Precast elements require joints that function to transfer the forces that occur between elements. Planning refers to the guidelines that apply in Indonesia, namely SNI 1727:2020, SNI 1726:2019, and SNI 2847:2019. Based on the results of the analysis obtained the configuration of the structure, the dimensions of each structural element, and the connection between the structural elements. The connection uses a combination of dry and wet joints which aims to produce a monolithic structure. The connection between the column and the column uses 4 PEC® Column Shoe, the connection between the main beam and the sub-beam uses a combination of corbel, 2 BECO® Beam Shoe at the bottom of the main beam, and a rebar coupler that connects the top reinforcement of the main beam. The connection between the beams and the main beam uses 2 BECO® Beam Shoes at the bottom of the beams and distribution reinforcement at the top of the beams. The connection of the slab to the beam uses joint reinforcement at the top and bottom of the slab.
References
Anonim. (2018). Petunjuk Teknis PEC® Column Shoe versi PEIKKO Group 09/2018. Finlandia: PEIKKO Group Corporation
Anonim. (2019a). Petunjuk Teknis BECO® Beam Shoe versi PEIKKO Group 03/2019. Finlandia: PEIKKO Group Corporation
Anonim. (2019b). SNI 03-1726-2019 tentang Tata Cara Perencanaan Ketahanan Gempa untuk Struktur Bangunan Gedung dan Non Gedung. Jakarta: Badan Standardisasi Nasional.
Anonim. (2019c). SNI 2847-2019 tentang Persyaratan Beton Struktural untuk Bangunan Gedung dan Penjelasan. Jakarta: Badan Standardisasi Nasional.
Anonim. (2020). SNI 1727-2020 tentang Beban Desain Minimum dan Kriteria Terkait Gedung dan Struktur Lain. Jakarta: Badan Standardisasi Nasional.
Abdul-Razzaq, K. S., Dawood, A. A., & Mohammed, A. H. (2019). A Review of Previous Studies on the Reinforced Concrete Corbels. IOP Conference Series: Materials Science and Engineering, 518(2). https://doi.org/10.1088/1757-899X/518/2/022057
Cahyani, K. N., Soehardjono, A., & Wibowo, A. (2019). Kajian Eksperimental Pola Retak Pada Sambungan Balok-Kolom Beton Pracetak Dengan Menggunakan Sambungan Kering. PROKONS Jurusan Teknik Sipil, 13(1), 31. https://doi.org/10.33795/prokons.v13i1.171
Camnasio, E., & Kiriakopoulos, P. (2012). Investigation on Bolted Precast Column Connection for Seismic Applications. 1–8.
Elliott, K. S. (2019). Precast Concrete Structures (Second Edition). Crc Press. www.TechnicalBooksPdf.com
Ervianto, W. I. (2006). Studi Implementasi Teknologi Beton Pracetak Bagi Bangunan Gedung. Jurusan Teknik Sipil - Fakultas Teknik Universitas Atma Jaya Yogyakarta .
Green Building Council Indonesia. (2021, November 18). Net Zero Healthy. Https://Gbcindonesia.Org. https://gbcindonesia.org/netzero
Khakim, Z., Anwar, M. R., & Hasyim, M. H. (2012). Studi Pemilihan Pengerjaan Beton Antara Pracetak Dan Konvensional Pada Pelaksanaan Konstruksi Gedung Dengan Metode Ahp. Jurnal Rekayasa Sipil, 5(2), 13.
Kim, T., & Chae, C. U. (2016). Evaluation analysis of the CO2 emission and absorption life cycle for precast concrete in Korea. Sustainability (Switzerland), 8(7). https://doi.org/10.3390/su8070663
Kinnunen, J. (2017). ETA Tests and Design of HPKM Column Shoe Connections. Procedia Engineering, 172, 521–528. https://doi.org/10.1016/j.proeng.2017.02.061
Peng, W., & Low Sui Pheng. (2011). Lean Production, Value Chain and Sustainability in Precast Concrete Factory – A Case Study in Singapore. Lean Construction Journal 2011, 19–37.
Pratama, M. F. W., & Hidayatullah, E. F. N. (2021). Perancangan Ulang Struktur Atas Gedung Kantor Otoritas Jasa Keuangan Surakarta Menggunakan Baja Konvensional. INERSIA Lnformasi dan Ekspose Hasil Riset Teknik Sipil dan Arsitektur, 17(2), 141–152. https://doi.org/10.21831/inersia.v17i2.34187
Spence, R., & Mulligan, H. (1995). Sustainable development and the construction industry. Habitat International, 19(3), 279–292. https://doi.org/10.1016/0197-3975(94)00071-9
Tjahjono, E., & Purnomo, H. (2010). Pengaruh Penempatan Penyambungan Pada Perilaku Rangkaian Balok-Kolom Beton Pracetak Bagian Sisi Luar. MAKARA of Technology Series, 8(3), 90–97. https://doi.org/10.7454/mst.v8i3.266
Wu, P. (2014). Monitoring Carbon Emissions in Precast Concrete installation Through Lean Production - A Case Study in Singapore. Journal of Green Building, 191–211.
Yuniarto Adi, R., Nurhuda, I., Fitriani Perilaku dan Kekuatan Sambungan Kolom pada Sistem Beton Pracetak, I., & Fitriani, I. (2014). Perilaku dan Kekuatan Sambungan Kolom pada Sistem Beton Pracetak. Jurnal MKTS, 20(1).
Authors who publish with this journal agree to the following terms:
- Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution License that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.
- Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.
- Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).
Abstract viewed = 404 times
PDF downloaded = 559 times
