KARAKTERISTIK BAMBU ORI BANYUWANGI LAMINASI SUSUNAN LURUS BERDASARKAN KUAT TEKAN, KUAT TARIK DAN KUAT LENTUR

  • Mirza Ghulam Rifqi Program Studi DIII-Teknik Sipil, Teknik Sipil, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia
  • M. Shofi'ul Amin Program Studi DIII-Teknik Sipil, Teknik Sipil, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia
  • Riza Rahimi Bachtiar Program Studi DIII-Teknik Sipil, Teknik Sipil, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia
  • Dadang Dwi Pranowo Program Studi DIII-Teknik Sipil, Teknik Sipil, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia
  • Hakim Sobirin Program Studi DIII-Teknik Sipil, Teknik Sipil, Politeknik Negeri Banyuwangi, Banyuwangi, Indonesia
Keywords: bamboo ori, characteristics, laminate, wood

Abstract

The need for wood is increasing, it will be large-scale exploitation that destroys forest ecosystems. The use of wood materials must be reduced by replacing them with other materials so that the forest ecosystem is maintained. A suitable material to replace wood as a construction material is bamboo. Laminated bamboo is structural engineering to improve the mechanical properties of bamboo. The manufacture of laminated bamboo by gluing bamboo slats using a felt system to become blocks. In this study, using original bamboo with PVAC (Polyvinyl Acetate) adhesive. This study aims to determine the characteristics of laminated straight bamboo based on compressive strength, bending, and tensile strength. The manufacture and testing of laminated bamboo refer to SNI-03-3958-1995, SNI-03-3399-1994, SNI 03-3959-1995 and ISO 22157; 2019. The results showed that the characteristics of laminated bamboo without preservation and preservation with dimensions of 50 mm × 50 mm × 200 mm had an average compressive strength of 44.86 MPa and 40.96 MPa. While the bending value of laminated bamboo without preservation and preservation of dimensions 50 mm × 50 mm × 760 mm has an average value of bending of 85.45 MPa and 80.41 MPa. The tensile strength value of laminated bamboo without curing and preserving dimensions of 25 mm × 25 mm × 460 mm has an average of 519.95 MPa and 457.02 MPa. Based on the wood grade approach, laminated bamboo belongs to class II and belongs to the E25 quality code.

References

Anonim. (1994). SNI 03-3399:Metode Pengujian Kuat Tarik Kayu di Laboratorium. Jakarta: Badan Standardisasi Nasional.

Anonim. (1995). SNI 03-3958:Metode Pengujian Kuat Tekan Kayu di Laboratorium. Jakarta: Badan Standarisasi Nasional.

Anonim. (1995). SNI 03-3959:Metode Pengujian Kuat Lentur Kayu di Laboratorium. Jakarta: Badan Standarisasi Nasional.

Anonim. (1996). SNI 03-4154:Metode Pengujian Kuat Lentur Beton dengan Balok Uji Sederhana yang Dibebani Terpusat Langsung. Jakarta: Standar Nasional Indonesia.

Anonim. (2019). ISO 22157-1:Bamboo Structures - Determination - Of Physical and Mechanical Properties Of Bamboo Culm - Test Methods. International Organization for Standardization.

Balitbang. (2015). Bambu Laminasi. Denpasar: Balitbang Perumahan Wilayah II Denpasar.

Eratodi, I. L. (2017). Struktur dan Rekayasa Bambu. Denpasar: Universitas Pendidikan Nasional.

Hartanto, L. (2011). Seri Buku Informasi dan Potensi Pengolahan Bambu . Banyuwangi: Balai Taman Alas Purwo Banyuwangi.

Muhimatusakdiyah. (2020). Karakteristik Laminasi Bambu Petung Banyuwangi Ditinjau dari Kuat Tekan, Lentur dan Tarik . Banyuwangi.

Nasriadi, Morisco, & prayitno. (2012). Pengaruh Susunan Laminasi Bambu Petung Terhadap Kuat Geser dan Kuat Lentur Balok Laminasi Galar Bambu Petung. Bunga Rampai Penelitian Bambu.

Puspita, A. A., Sachari, A., & Sriwarno, A. B. (2016). Dinamika Budaya Material Pada Desain Furnitur Kayu Di Indonesia. Jurnal Seni Budaya, Vol 26, No 3.

Rifqi, M. G., Amin, M. S., & Bachtiar, R. R. (2020). Mechanical Properties of Culm Bamboo Endemic Banyuwangi Based on Tensile Strength Test. Internasional Seminar Of Science and Applied Technology, 399-406.

Saputro, D. N. (2017). Bambu Laminasi Sebagai Alternatif Pengganti Kayu Untuk Mendorong Ekonomi Kreatif Berbasis Potensi Lokal. Prosiding Seminar Nasional dan Call for Papers.

Setyo, N. I. (2014). Sifat Mekanika Bambu Petung Laminasi. konferensi Nasional Teknik sipil, 01.

Sutardi, S. R. (2015). Informasi Sifat Dasar dan Kemungkinan Penggunaan 10 Jenis Bambu. Bogor: Pusat Penelitian dan Pengembangan Hasil Hutan Badan Penelitian, Pengembangan dan Inovasi.

Published
2022-05-18
Section
Articles
Abstract viewed = 99 times
PDF downloaded = 119 times