ANALYSIS OF CONTROL BEHAVIOUR OF ARCH ON THROUGH ARCH BRIDGE CONSTRUCTION

Authors

  • Krisna Putra Wijaya Universitas Warmadewa
  • Thanh Trung Dang Department of Civil Engineering, National Central University, Chung-Li, Taoyuan, 32054, Taiwan
  • Cokorda Agung Yujana Department of Civil Engineering, Warmadewa University, Jalan Terompong No. 24, Denpasar, 80239
  • I Putu Deny Surastika Aditama Department of Civil Engineering, Warmadewa University, Jalan Terompong No. 24, Denpasar, 80239
  • I Gede Dhana Putra Sanjaya Department of Civil Engineering, Warmadewa University, Jalan Terompong No. 24, Denpasar, 80239

DOI:

https://doi.org/10.22225/jipe.3.2.2024.35-40

Keywords:

Bridge, Through Arc Bridge, Steel Frame Bridge, Upper Building Structure

Abstract

Bridges are structures that need to be well-planned to function optimally. Bridges come in various shapes and sizes, one of them is an arch bridge. Through this thesis preparation the author tried to plan the upper structure of a bridge with an arch type on Tukad Ayung Bridge. The initial planning data includes a length of the existing bridge of 64 m and a width of 15 m. The planning method using LRFD and SAP2000 for the software. The arch rib dimensions in the planning of the through arch steel bridge on Tukad Ayung is 900.600.30.40 box profile with a cross-sectional height. It is using steel material of special type of structural steel for bridges with ASTM A 709 grade 50 specifications. From the analysis result, the stress melting point is fy= 345 MPa and the modulus of elasticity steel is E= 200000 MPa. The cross-sectional height is 900 mm, cross-sectional width is 600 mm, the body thickness (tw) is 30 mm and the wing thickness (tf) is 40 mm.

References

Azra, A., Rizal, F., & Syukri. (2017). Perencanaan Bangunan Atas Jembatan Lengkung Rangka Baja Krueng Sakui Kecamatan Sungai Mas Kabupaten Aceh Barat. Jurnal Sipil Sains Terapan, 01(01), 1-9.

Irawan, R., & Tristanto, L. (2017). Pedoman Perancangan Jembatan Pelengkung. Kementerian PUPR.

Dewobroto, W. (2016). Struktur Baja - Perilaku, Analisis & Desain - Aisc 2010. Lippo Karawaci, Tangerang: Jurusan Teknik Sipil Uph.

Anonim. (2016a). SNI 1725:2016 Pembebanan Untuk Jembatan. Badan Standariasi Nasional.

Anonim. (2016b). SNI 2833:2016 Perencanaan Jembatan Terhadap Beban Gempa. Badan Standariasi Nasional.

A. Hool, G., & Kinne, W. (1943). Movable And Long-Span Steel Bridges. New York, London: McGraw-Hill Book Company, Ins.

Chen, W.-F., & Duan, L. (2000). Bridge Engineering Handbook. Boca Raton London New York Washington, D.C.: Crc Press Llc.

Fitrisari, N., Pranoto, Y., & Jepriani, S. (2020). Desain Jembatan Pelengkung Lamaru-Tritip Menggunakan Tipe Through Arch. Jurnal Teknologi Sipil, 22-28.

Ghello, J. F. (2019). Studi Alternatif Perencanaan Struktur Atas Jembatan Rangka Baja Tipe Pelengkung Dengan Metode Lrfd Pada Jembatan Seacorm Desa Perancak Kabupaten Jembrana-Bali. E-Journal Perencanaan Sturktur Atas Jembatan, I-Viii.

Hall, D. H., & Lawin, A. R. (1985). Design Of Steel Tied Arch Bridges. Coopersburg, Pennsylvania: Bridge Software Development International Ltd.

Hibbeler, R. C. (2012). Structural Analysis. Upper Saddle River, New Jersey: Pearson Prentice Hall.

Luthfi, I. S., Indra, S., & Santosa, A. (2019). Studi Perencanaan Jembatan Rangka Baja Tipe Pelengkung (Through Arch) Pada Jembatan Cisadane Bogor Jawa Barat. Student Journal Gelagar, 1(1), 7-14.

Anggraeni, N. P. Indah Puspita, I. N. Sinarta and I. P. Ellsa Sarassantika (2022, Oktober). Composite structure in the Kutus-kutus factory building, Gianyar, Bali. Journal of Infrastructure Planning and Engineering (JIPE), Vol. 1(2), 81-86.

Setiawan, B., & Masagala, A. A. (2021, Juli). Perancangan Struktur Atas Jembatan Busur Baja Tipe Tied Arch Bridge Bentang 60 M (Studi Kasus: Jembatan Kali Putih, Magelang). Jurnal Renovasi, 6(1), 34-46.

Wanarno, A. N., Pakpahan, A. N., Tudjono, S., & Nuroji. (2013). Perencanaan Jembatan Leho Kawasan Pesisir Kabupaten Karimun, Kepulauan Riau, Dengan Struktur Jembatan Pelengkung (Arch Bridge). Jurnal Tugas Akhir, 1-7.

Downloads

Published

2024-12-31

Issue

Vol. 3 No. 2 (2024)

Section

Articles

License

Authors who publish with this journal agree to the following terms:

1. Authors retain copyright and grant the journal right of first publication with the work simultaneously licensed under a Creative Commons Attribution-ShareAlike 4.0 International (CC BY-SA 4.0) that allows others to share the work with an acknowledgement of the work's authorship and initial publication in this journal.

2. Authors are able to enter into separate, additional contractual arrangements for the non-exclusive distribution of the journal's published version of the work (e.g., post it to an institutional repository or publish it in a book), with an acknowledgement of its initial publication in this journal.

3. Authors are permitted and encouraged to post their work online (e.g., in institutional repositories or on their website) prior to and during the submission process, as it can lead to productive exchanges, as well as earlier and greater citation of published work (See The Effect of Open Access).